• What are the tricks that corporate America uses to get us to spend more money?

    You’ve done what you can to cut back your spending. You brew coffee at home, you don’t walk into Target and you refuse to order avocado toast. (Can you sense my millennial sarcasm(Continue reading)

    It depends on the make/model of the device, usually a router or switch. You would need to check the manual as not all routers and switches are made the same. Typically, green LED lights indicate that the port is on. If it’s green flashing, that means there is activity. If there is no LED light, then it’s either off or failing. Amber (orange) can also indicate a failing port or connection. Sometimes, it could be red or yellow, which can also mean bad connection or such.

    Usually the connection state is green or yellow/orange where green means higher speed and yellow/orange means lower speed. (Available speeds are 10/100/1000 megabits/sec). Speed is negotiated at connection, then is fixed.

    Name

    Link speed (LED on right of upper canister)

    Activity (LED on left of upper canister)

    Description

    The LED is on when there is a link connection; otherwise, the LED is off.

    The LED is flashing when there is activity on the link; otherwise, the LED is off.

    Color

    Green

    Yellow

    Where do billionaires invest when there’s high inflation?

    Elon Musk, the world’s richest person, revealed his strategy this week for investing alongside record inflation. According to the WSJ, since February 2020, the Fed increased the nation’s money supply by a staggering 40%. To some experts, it explains why the U.S. is experiencing its highest

    it depends on the card… one colour has 3 meanings. another card has 2 or 3 colours and many meanings. a third card has 2 lights with 4 colours each and 16 possible meanings. the basic deal is this… one light for power on; another for connectivity; and flashing for data movement. there is documentations out there.

    There is no standards to define how the LEDs should behave on the RJ45 ethernet port connector. Normally a blinking LED means activity of data flow IN or OUT of the device. The blinking LED may be Green or Amber (Orange) color. The old devices use the amber (orange) LED to indicate link speed, when on = 100Mbps, when off = 10Mbps. But newer devices can operate in 3 different speeds, 10Mbps, 100Mbps and 1Gbps. IBM use to have at the left a two colors LED, orange/green, and at the right only green. The right green indicate activity, and the left two colors LED indicate as such: orange=1Gbps, Green=100Mbps, none=10Mbps. The Netgear switches use only two Green LEDs, one at the left side and other at the right side of the RJ45 connector, the left LED blinks off when the connection is 100Mbps, or the right LED blinks off with 10Mbps. Note that the Netgear blinks off, it means, with no activity the specific LED stays lit.

    LED

    Color

    Description

    Left LED

    Amber

    or

    Green

    Speed indicator:

    • Amber on – Operating as a Gigabit connection (1000 Mbps).1
    • Green on – Operating as a 100-Mbps connection.
    • Off – Operating as a 10-Mbps connection.

    Right LED

    Green

    Link/Activity indicator:

    • Blinking – There is activity on this port.
    • Off – No link is established.

    1

    The NET MGT port only operates in 100-Mbps or 10-Mbps so the speed indicator LED will be green or off (never amber).

    Can I listen to SiriusXM for 3 months for free right now?

    Yes, you can. Stream SiriusXM for 3 months for free. See Offer Details.

    Flashing lights mean activity – no matter what the light is. If it is US/DS, then it is on the Upstream and Downstream. If it is ONLINE, then it almost done connecting to the internet. If it is on WIFI or ethernet then it communicating with one or more devices on your network. That’s a good sign. You don’t want that light off if you have a device plugged into the ethernet. That’s bad.

    Now as far as colors. That is determined by the manufacturer of the device. There is no standard color when it comes to routers or modems. It’s all different! Since I don’t know the manufacturer or model of the device I will just have to use an example. That is an Arris DG1670A. Which is commonly used with Charter Business Accounts.

    That model has two color lights on the back: Green/Amber. Green means that the port is running at 1 Gbps. Amber means that it is running at 100 Mbps. If you see Amber that means something connected to that port is not compatible with gigabit speeds. The device automatically slowed itself down to compensate.

    Is that a problem?

    Provably not. Most internet speeds are not fast enough for you to notice. Only at speeds faster than 100 are you going to notice the difference. Or if you transfer large files between the computers. Otherwise – your fine for now. Worry about it when it becomes a problem.

    If you want more specific information then please include the model and make of your router. That will help us explain more. Hope that helps you understand modem/router lights. Take care.

    Blinking green means that port is active.

    Orange indicates failure. For port it is err disabled. For others it indicates failure.

    Some other status indicators are system and alarm which I dictate system health.

    For more info you can look for the manual of the router that comes with it.

    On computer ethernet ports there are usually two leds (on some machines there are no leds) One represents the connection state (fixed light) and the other represents activity. Connection state goes on when an active device is sensed at the other end of the cable (usually a switch). Usually the connection state is green or yellow/orange where green means higher speed and yellow/orange means lower speed. (Available speeds are 10/100/1000 megabits/sec). Speed is negotiated at connection, then is fixed. The activity led is usually green and blinks when data is sensed thru the port (either inbound or outbound).

    On cheap switches there is usually a single green led per port indicating connection, which blinks when data is seen passing. Advanced switches can have different meanings for lights depending on user action or configuration.

    Save up to 80% on your next printer ink cartridges!

    CompAndSave.com features an extensive collection of discounted ink refill cartridges. Shop and save now!

    It depends ENTIRELY on the specific piece of gear – they vary, there is no standard, and sometimes they can vary even in different pieces of gear from the SAME MANUFACTURER (though that’s usually over multiple generations).

    On my UniFi gear, there are 3 colors. Amber means slow, either 10 Mbps or 100 Mbps. Green means Gigabit, or 1000 Mbps. White means 10 Gigabit, or 10000 Mbps. There is no standard, so you need to look at the device or check the manual.

    I love seeing those couple of white lights, even though I don’t get a lot of real benefit from the speed of the single 10G connection yet.

    There are also lights on my switch that indicate POE being active on a port, and blinking shows activity.

Buy CBD OIL 420